Castrol Magnatec Start Stop A5 5W-30 Fully Synthetic Engine Oil 5L is a fully synthetic 5W-30 engine oil from Castrol, supplied in a 5L pack. It meets ACEA A5/B5, API SP, ILSAC GF-6 and carries manufacturer approvals including VW VWC 53036.
Castrol MAGNATEC contains intelligent molecules that cling to engine surfaces, so protection is in place from the moment the engine is started, when most wear takes place.
Specifications at a glance
| Brand |
Castrol |
| Product |
Castrol Magnatec Start Stop A5 |
| Viscosity grade |
5W-30 |
| Oil type |
Fully Synthetic |
| Pack size |
5L bottle |
| Industry specifications |
ACEA A5/B5; API SP; ILSAC GF-6 |
| Manufacturer approvals |
VW VWC 53036 |
| Also meets or recommended for |
Ford WSS-M2C913-A; Ford WSS-M2C913-B; Ford WSS-M2C913-C; Ford WSS-M2C913-D |
| Part number |
521773420 |
| Manufacturer reference |
15F909 |
Suitable for
Use where the vehicle manufacturer calls for VW VWC 53036; Ford WSS-M2C913-A; Ford WSS-M2C913-B; Ford WSS-M2C913-C; Ford WSS-M2C913-D. Commonly used in Volkswagen, Audi, SEAT and Skoda, Ford vehicles. Always confirm the grade against your owner's handbook or service schedule before use, as requirements vary between engines of the same model.
Key benefits
- Fully synthetic base oil keeps its viscosity stable from cold starts to sustained high temperatures.
- ACEA A5/B5: a fuel-economy specification for engines designed to run a lower viscosity oil, common on Ford, Volvo and Jaguar Land Rover.
- API SP: the current API petrol engine category, with added protection against low-speed pre-ignition in turbocharged engines.
- ILSAC GF-6: the latest fuel-economy standard for petrol engines, widely used by Japanese, Korean and American manufacturers.
Frequently asked questions
Is Castrol Magnatec Start Stop A5 5W-30 right for my car?
Look in your handbook or on the oil filler cap for the specification codes listed above, such as VW VWC 53036. If your vehicle lists one of them, this oil meets the requirement. If you are unsure, send us your registration number and we will confirm the correct grade.
What does 5W-30 mean?
The first number (5W) describes how easily the oil flows when cold, so a lower number means easier cold starts. The second number describes the oil's thickness at normal running temperature. Always use the grade your manufacturer specifies.
How much oil will I need?
Most petrol and diesel cars take between 4 and 6 litres for a full oil change, so a 5L pack covers a typical service with some left for top-ups. Check your handbook for the exact capacity including the filter.
Supplied sealed in the manufacturer's original packaging and dispatched from the UK by Nitroma Lubricants.