Mobil 1 Fuel Economy 0W-30 Engine Oil 20L is a 0W-30 engine oil from Mobil, supplied in a 20L pack. It meets ACEA A5/B5, ACEA C2, API SL and carries manufacturer approvals including 95200377, DFTR 15D100 (227.61).
Mobil 1 is ExxonMobil's advanced full synthetic range, chosen as factory fill by many manufacturers and proven in top-level motorsport.
Specifications at a glance
| Brand |
Mobil |
| Product |
Mobil 1 Fuel Economy |
| Viscosity grade |
0W-30 |
| Pack size |
20L bucket |
| Industry specifications |
ACEA A5/B5; ACEA C2; API SL |
| Manufacturer approvals |
95200377; DFTR 15D100 (227.61) |
| Also meets or recommended for |
WSS-M2C920-A |
| Part number |
521777995 |
| Manufacturer reference |
154321 |
Suitable for
Use where the vehicle manufacturer calls for 95200377; DFTR 15D100 (227.61); WSS-M2C920-A. Commonly used in Ford vehicles. Always confirm the grade against your owner's handbook or service schedule before use, as requirements vary between engines of the same model.
Key benefits
- ACEA A5/B5: a fuel-economy specification for engines designed to run a lower viscosity oil, common on Ford, Volvo and Jaguar Land Rover.
- ACEA C2: a low-SAPS, fuel-economy specification that is safe for petrol and diesel particulate filters, typical of Peugeot, Citroën, Fiat and Toyota requirements.
- API SL: an API petrol engine category suited to engines built before 2004.
- 20L bulk pack for workshops and fleets, with a lower cost per litre than retail bottles.
Frequently asked questions
Is Mobil 1 Fuel Economy 0W-30 right for my car?
Look in your handbook or on the oil filler cap for the specification codes listed above, such as 95200377. If your vehicle lists one of them, this oil meets the requirement. If you are unsure, send us your registration number and we will confirm the correct grade.
What does 0W-30 mean?
The first number (0W) describes how easily the oil flows when cold, so a lower number means easier cold starts. The second number describes the oil's thickness at normal running temperature. Always use the grade your manufacturer specifies.
How much oil will I need?
Most petrol and diesel cars take between 4 and 6 litres for a full oil change, so a 20L pack covers a typical service with some left for top-ups. Check your handbook for the exact capacity including the filter.
Supplied sealed in the manufacturer's original packaging and dispatched from the UK by Nitroma Lubricants.
