MPM High Performance Street 0W-40 Fully Synthetic Engine Oil 5L

MPM High Performance Street 0W-40 Fully Synthetic Engine Oil 5L is a fully synthetic 0W-40 engine oil from MPM, supplied in a 5L pack. It meets ACEA A3/B4, API SN Plus, API SP and carries manufacturer approvals including MB-Approval 229.5, Porsche A40, VW 502.00.

MPM is a Dutch lubricant specialist known for manufacturer-specific formulations, which is why the range includes an oil for almost every OEM specification on the market.

Specifications at a glance

Suitable for

Use where the vehicle manufacturer calls for MB-Approval 229.5; Porsche A40; VW 502.00; VW 505.00; BMW LL-01; CHRYSLER MS 10725; Chrysler MS 12633; Ford M2C937-A. Commonly used in Volkswagen, Audi, SEAT and Skoda, BMW and MINI, Mercedes-Benz, Ford, Vauxhall and Opel, General Motors vehicles. Always confirm the grade against your owner's handbook or service schedule before use, as requirements vary between engines of the same model.

Key benefits

• Fully synthetic base oil keeps its viscosity stable from cold starts to sustained high temperatures.
• ACEA A3/B4: a full-SAPS specification for high-performance petrol and diesel engines without particulate filters, with strong protection at extended drain intervals.
• API SP: the current API petrol engine category, with added protection against low-speed pre-ignition in turbocharged engines.

Frequently asked questions

Is MPM High Performance Street 0W-40 right for my car?

Look in your handbook or on the oil filler cap for the specification codes listed above, such as MB-Approval 229.5. If your vehicle lists one of them, this oil meets the requirement. If you are unsure, send us your registration number and we will confirm the correct grade.

What does 0W-40 mean?

The first number (0W) describes how easily the oil flows when cold, so a lower number means easier cold starts. The second number describes the oil's thickness at normal running temperature. Always use the grade your manufacturer specifies.

How much oil will I need?

Most petrol and diesel cars take between 4 and 6 litres for a full oil change, so a 5L pack covers a typical service with some left for top-ups. Check your handbook for the exact capacity including the filter.

Supplied sealed in the manufacturer's original packaging and dispatched from the UK by Nitroma Lubricants.