MPM Premium Synthetic Esp-x Bag in Box 5W-30 Engine Oil 20L

MPM Premium Synthetic Esp-x Bag in Box 5W-30 Engine Oil 20L is a fully synthetic 5W-30 engine oil from MPM, supplied in a 20L pack. It meets API SN Plus, API SP, ACEA C2, ACEA C3 and carries manufacturer approvals including BMW LL-04, MB-Approval 229.51, MB-Approval 229.52.

MPM is a Dutch lubricant specialist known for manufacturer-specific formulations, which is why the range includes an oil for almost every OEM specification on the market.

Specifications at a glance

Suitable for

Use where the vehicle manufacturer calls for BMW LL-04; MB-Approval 229.51; MB-Approval 229.52; OV 040 1547 - D30; OV 040 1547 - G30; Porsche C30; VW 504.00; VW 507.00. Commonly used in Volkswagen, Audi, SEAT and Skoda, BMW and MINI, Mercedes-Benz, Vauxhall and Opel, General Motors, Renault, Dacia and Nissan vehicles. Always confirm the grade against your owner's handbook or service schedule before use, as requirements vary between engines of the same model.

Key benefits

• Fully synthetic base oil keeps its viscosity stable from cold starts to sustained high temperatures.
• API SP: the current API petrol engine category, with added protection against low-speed pre-ignition in turbocharged engines.
• ACEA C2: a low-SAPS, fuel-economy specification that is safe for petrol and diesel particulate filters, typical of Peugeot, Citroën, Fiat and Toyota requirements.
• ACEA C3: a low-SAPS specification that protects diesel particulate filters and catalysts while keeping a higher film strength, used by BMW, Mercedes-Benz, Volkswagen Group and GM.
• 20L bulk pack for workshops and fleets, with a lower cost per litre than retail bottles.

Frequently asked questions

Is MPM Premium Synthetic Esp-x Bag in Box 5W-30 right for my car?

Look in your handbook or on the oil filler cap for the specification codes listed above, such as BMW LL-04. If your vehicle lists one of them, this oil meets the requirement. If you are unsure, send us your registration number and we will confirm the correct grade.

What does 5W-30 mean?

The first number (5W) describes how easily the oil flows when cold, so a lower number means easier cold starts. The second number describes the oil's thickness at normal running temperature. Always use the grade your manufacturer specifies.

How much oil will I need?

Most petrol and diesel cars take between 4 and 6 litres for a full oil change, so a 20L pack covers a typical service with some left for top-ups. Check your handbook for the exact capacity including the filter.

Supplied sealed in the manufacturer's original packaging and dispatched from the UK by Nitroma Lubricants.