Shell Helix HX7 10W-40 Engine Oil 20L is a 10W-40 engine oil from Shell, supplied in a 20L pack. It meets ACEA A3/B4, API SP and carries manufacturer approvals including VW 501 01, VW 505 00.
Shell Helix HX7 blends synthetic and mineral base oils with Shell's Active Cleansing Technology, giving a strong everyday oil for a wide range of cars.
Specifications at a glance
| Brand |
Shell |
| Product |
Shell Helix HX7 |
| Viscosity grade |
10W-40 |
| Pack size |
20L can |
| Industry specifications |
ACEA A3/B4; API SP |
| Manufacturer approvals |
VW 501 01; VW 505 00 |
| Also meets or recommended for |
MB 229.3; Renault RN 0700; Renault RN 0710 |
| Part number |
521772255 |
| Manufacturer reference |
550072325 |
Suitable for
Use where the vehicle manufacturer calls for VW 501 01; VW 505 00; MB 229.3; Renault RN 0700; Renault RN 0710. Commonly used in Volkswagen, Audi, SEAT and Skoda, Mercedes-Benz, Renault, Dacia and Nissan vehicles. Always confirm the grade against your owner's handbook or service schedule before use, as requirements vary between engines of the same model.
Key benefits
- ACEA A3/B4: a full-SAPS specification for high-performance petrol and diesel engines without particulate filters, with strong protection at extended drain intervals.
- API SP: the current API petrol engine category, with added protection against low-speed pre-ignition in turbocharged engines.
- 20L bulk pack for workshops and fleets, with a lower cost per litre than retail bottles.
Frequently asked questions
Is Shell Helix HX7 10W-40 right for my car?
Look in your handbook or on the oil filler cap for the specification codes listed above, such as VW 501 01. If your vehicle lists one of them, this oil meets the requirement. If you are unsure, send us your registration number and we will confirm the correct grade.
What does 10W-40 mean?
The first number (10W) describes how easily the oil flows when cold, so a lower number means easier cold starts. The second number describes the oil's thickness at normal running temperature. Always use the grade your manufacturer specifies.
How much oil will I need?
Most petrol and diesel cars take between 4 and 6 litres for a full oil change, so a 20L pack covers a typical service with some left for top-ups. Check your handbook for the exact capacity including the filter.
Supplied sealed in the manufacturer's original packaging and dispatched from the UK by Nitroma Lubricants.