Shell Helix Ultra 0W-40 Engine Oil 4L is a 0W-40 engine oil from Shell, supplied in a 4L pack. It meets ACEA A3/B3, ACEA A3/B4, API SP and carries manufacturer approvals including MB 226.5, MB 229.5, Renault RN 0700.
Shell Helix Ultra is made with Shell PurePlus Technology, which turns natural gas into a crystal-clear base oil with virtually none of the impurities found in crude oil, giving exceptional cleanliness and wear protection.
Specifications at a glance
| Brand |
Shell |
| Product |
Shell Helix Ultra |
| Viscosity grade |
0W-40 |
| Pack size |
4L bottle |
| Industry specifications |
ACEA A3/B3; ACEA A3/B4; API SP |
| Manufacturer approvals |
MB 226.5; MB 229.5; Renault RN 0700; Renault RN 0710; VW 502 00; VW 505 00 |
| Part number |
521772201 |
| Manufacturer reference |
550065927 |
Suitable for
Use where the vehicle manufacturer calls for MB 226.5; MB 229.5; Renault RN 0700; Renault RN 0710; VW 502 00; VW 505 00. Commonly used in Volkswagen, Audi, SEAT and Skoda, Mercedes-Benz, Renault, Dacia and Nissan vehicles. Always confirm the grade against your owner's handbook or service schedule before use, as requirements vary between engines of the same model.
Key benefits
- ACEA A3/B3: a full-SAPS specification for petrol and diesel engines with normal or extended drain intervals.
- ACEA A3/B4: a full-SAPS specification for high-performance petrol and diesel engines without particulate filters, with strong protection at extended drain intervals.
- API SP: the current API petrol engine category, with added protection against low-speed pre-ignition in turbocharged engines.
Frequently asked questions
Is Shell Helix Ultra 0W-40 right for my car?
Look in your handbook or on the oil filler cap for the specification codes listed above, such as MB 226.5. If your vehicle lists one of them, this oil meets the requirement. If you are unsure, send us your registration number and we will confirm the correct grade.
What does 0W-40 mean?
The first number (0W) describes how easily the oil flows when cold, so a lower number means easier cold starts. The second number describes the oil's thickness at normal running temperature. Always use the grade your manufacturer specifies.
How much oil will I need?
Most petrol and diesel cars take between 4 and 6 litres for a full oil change, so a 4L pack covers a typical service with some left for top-ups. Check your handbook for the exact capacity including the filter.
Supplied sealed in the manufacturer's original packaging and dispatched from the UK by Nitroma Lubricants.